Official parts list!

[hakmazter]

As everyone can see, we have quantities on the cart now. I am not done with everything, but am getting close. Please let me know what we need to have in stock under the assumption that we are placing orders weekly. We have parts we have never sold yet and some we cannot keep in stock. Here is where the list will begin....Please do not just throw out we need 100 of this, etc....and if you want something specific, I will gladly order it as long as you buy it. I can also edit posts and enter the date I ordered products here. There is a partial explanation in 2009 changes.....

Mike

[slakr]

Mike, I need EX-0506 Battery holder and box (Fusion). It says there are 10 in stock, but they are $10,000.00 :-O
I also need ZX-0015 Shock Shaft Ball End (ZX-1R/K8-T), but they are "out of stock".

Thanks.
Tim S.

[xxxtruck]

I need the shock shafts ball ends and front and rear arms.

[vnmsgt]

When you guys say you need anything for the shocks you need to specify whether or not you need big bore parts. The only exceptions are the shock shafts and shock o-ring rebuild kits as they are the same as the old stock shocks.

[hakmazter]

arms are on the way.

[diamond_rc_racing]

Mike
Order some threaded big bore shocks I will buy 2 full sets for buggy.

[hakmazter]

I have them. Sorry, there are a few more boxes I have to go through.....my bad.

I'll go enter those numbers now.

We had 100 sets of each and they actually sell.....

[slakr]

List of "Out of stock" items I still need/want:
Qty (1) JR-0076 Hardened Racing Hinge Pin (http://casterracingusa.com/product.php?productid=39&quantity=1)
Qty (2) ZX-0021-FR ZX-1R Front/Rear Lower Suspension Arms (http://casterracingusa.com/product.php?productid=138&quantity=2)
Qty (1) ZX-0022 ZX-1R Front Upper Suspension Arms (http://casterracingusa.com/product.php?productid=139&quantity=1)
Qty (1) ZX-0035 Front Upper Suspension Hinge Pin Holder (ZX-1R/K8-T) (http://casterracingusa.com/product.php?productid=154&quantity=1)
Qty (1) ZX-0094-0 Series Front Sway Bar (ZX-1R/K8-T) (http://casterracingusa.com/product.php?productid=215&quantity=1) (B=2.3mm)
Qty (1) ZX-0015 Shock Shaft Ball End (ZX-1R/K8-T) (http://casterracingusa.com/product.php?productid=132&cat=0&page=1)

[hakmazter]

check again. I am finding more stuff as I go. Still have 3 boxes left to go through. I do know we are out of lower arms and hardened hinge pins and grenade motors and they are on the way.

[cheesecake]

keep up the good work mike

[CHRIS]

Mike
I need a Program Card for the EX-1 speedo & (F8T) if the boat will shift gears and get them here. lol

[DustinH]

Need 13 & 15 tooth clutch bells probably.

[DustinH]

Did we get the fusion fluids yet?

[badassrevo]

I want a 1.5 front shock tower. Please PM me when available and I will PayPal imeadiatly.

[Team Hoagie]

A Scott Ullig posted on SGrid and is wanting the Caster aluminum servo horns, part #JR-0107. He said the Caster site shows them out of stock, and I told him I'd find out when they'd be available again. Is there an ETA?

[vnmsgt]

Hey Mike, order some Caster tire glue. I got some before and have sold them with no complaints. I would like 2 bottles.

Also are the 1.5 diff parts in stock yet? (ring, pinion) Also internal diff gears. I am curious to see if they are exactly the same (internal gears) as before.

Also the oval air filters and cage and rubber neck. I want 3

Also exhaust gaskets part #CR2-0039. Get me 4 if possible. I carry those only and they sell pretty good.

[hakmazter]

We have 2 purple ones here. JR-0107pu?

I have oval air filters.

I thought you owned a 1.5 and a 1R.....lol.

[rangerdanger]

Hey Mike,

Still waiting on 4 sets of cap hinge pins, and my last order only received 1 pack of hinge pin bushings when I had ordered 2
Thanks
Rob

[vnmsgt]

We have 2 purple ones here.

exhaust gaskets? If so hold them for me and order the rest. I have to see what other parts I need. Get those Lipo's in yet?

[hakmazter]

no, those are the servo horns....

[Team Hoagie]

We have 2 purple ones here. JR-0107pu?

I'll let him know! I'm going to give him your email if that's okay, so he can contact you. It still show's the purple ones out of stock.

[hakmazter]

I do not have everything in the cart. close, but not everything.....lol.

You have no idea what a monumental task it is to move everything....

[xxxtruck]

PRO FUSION STOCK TIRES 4 sets.

[Aggressor08]

Hey Mike, I was wondering if you could order some parts for me that are currently listed as "out of stock" on the website. If the parts are already on there way let me know when they will be available for purchase.

1) CR2-0007 Drive Shaft Covers Quantity: 4 2) CR2-0017-WH Series Wheels (pair) Quantity: 4

I believe the wheels come in a pack of four so, to avoid any confusion I just need to order 2 full sets of wheels for my buggy. Thanks so much

[razzor]

The wheels come in pairs.

[Aggressor08]

thanks for the clarification, razzor. technically, yes they can be purchased as a pair... But when Cam used to process the bulk of the orders he used to send me four full sets of buggy tires when I only wanted two sets or a quantity of "four" pairs. Since I believe Mike is processing orders now I figured I would eliminate the confusion up front... just in case

[razzor]

understood ;)

[slakr]

I need K8-0076 (RTR Engine Mounts)

[puba187]

i'll take:

1 Fusion 750 starter box
1 MK21-013 Connecting Rod
1 JR-01081 for futaba servo spline in silver
1 zx-1r to zx-1.5r conversion kit;)
1 25lbs bag-o-skills:&!@ let me know if you have to backorder it.

[Deznuts05]

need some arms

oh and I'll take two orders of the 25lbs of skills

[slakr]

What is the difference between the ZX-0076 ZX-1R RTR Replacement Engine Mount and the K8-0076 K8-T Engine Mount?
I need a set for my K8T.

[vnmsgt]

The ZX-0076 allows you to move the motor forward or backwards in the mount to put it where you want it to center the bell with the spur gear or the hole on the chassis. The K8T one you posted the # for is the same. I do not think the Kits and RTR's come with them and are different.

[slakr]

So the ZX-0076 should work on the K8T... right?

[vnmsgt]

Yes it will work. Think you will be better off finding a one piece mount on ebay or something from a Mugen or get a Caster 2 or 3 piece mount. They are much better.

[slakr]

I have the Mugen one piece to use with my Grenade. But I also have a practice/basher engine (OFNA Force .28) that has a roto start... that's why I need the RTR mounts :-)

[puba187]

i'll take:

1 Fusion 750 starter box
1 MK21-013 Connecting Rod
1 JR-01081 for futaba servo spline in silver
1 zx-1r to zx-1.5r conversion kit;)
1 25lbs bag-o-skills:&!@ let me know if you have to backorder it.


any word on this stuff?

[cheesecake]

he said no bag o skills for you but he has another bag o s for you hehehe lol jk

[Dave D]

So the 1 piece motor mount for an mbx5 will fit the K8-T and also the zx-1.5r

[slakr]

So the 1 piece motor mount for an mbx5 will fit the K8-T and also the zx-1.5r

Yes

[hakmazter]

any word on this stuff?

Got the starter box and towers on the way just because I ordered some. Missed everything else until I place another order on Monday. I

[puba187]

Got the starter box and towers on the way just because I ordered some. Missed everything else until I place another order on Monday. I

thats cool. i'll place an order when they all get here. just let me know. thanks.

[slakr]

Hey Mike (HAK),

Please let me know when ZX-0087 Servo Ball End 6mm plastic (ZX-1R/K8-T) are in stock... I need 'em bad ;)

Also waiting on ZX-0094-0B (2.3mm) Series Front Sway Bar (ZX-1R/K8-T)

Thanks.
-Tim

[badassrevo]

Sweet, I want a 1.5r front tower.

[RKJJ123 aka KJs Dad]

Mike can we get some more ZX- 0030 differential cases and some of the 1.5r ring and pinion gears.

[gofast072]

when will u be getting some more tires in im wanting about 10 sets tires and yellow dish wheels proline style.

[hakmazter]

10 sets? Holy crap..... do you mean 10 pair (20) or 10 sets (40)

I will have to place an order just for you.

By the way, I have a killer deal on the green no dust wheels if anyone wants to do the green look.... Both styles of wings also......

[Dave D]

I'm going to be needing atleast
Tires and foams only
(2) ZB02 = 4 tires
(2) ZB03 = 4 fires

What kind of deal on the no dust wheels . I looked in the store and it said out of stock.

Same thing with the wings. Store say's out of stock. I like Yellow.
When your on bigger tracks at night you need the bright colors.
My Hyper is a Glow in the Dark Yellow/Green. The dogs hate it.

If these clutch shoes come with springs I'll order them both also.
(1) JR-0127 7075 Aluminum Clutch Shoes
(1)JR-0128 7075 Aluminum Clutch Shoes

(1) K8-0002 Clear Truggy Body

And as far as tires go is it just that one kind for the truggy?

That's it for everything that shows out of stock.

[gofast072]

Ya i want
3- complete sets zbo1
5- complete set zbo2
2- complete sets zbo3
and its tempting but i dont do the green.Thanks not a big hurry on the tires need them next month.

[slakr]

Hey Mike (HAK),

Please let me know when ZX-0087 Servo Ball End 6mm plastic (ZX-1R/K8-T) are in stock... I need 'em bad ;)

Also waiting on ZX-0094-0B (2.3mm) Series Front Sway Bar (ZX-1R/K8-T)

Thanks.
-Tim

In stock yet???
Really need the ZX-0087... just waiting on those before placing my next order :D

[hakmazter]

Stuff is in the air. I got 87s and 30s coming....

Mike

[vnmsgt]

Hey Mike. do you have these parts for the 1.5R coming? These part #'s are from the
ZX1R but want the 1.5R ones.

ZX-0084 http://casterracingusa.com/product.php?productid=205&cat=26&page=4
ZX-0088 http://casterracingusa.com/product.php?productid=209&cat=0&page=1
CR2-0028 http://casterracingusa.com/product.php?productid=313&cat=0&page=1

Not sure of the part numbers if they will be the same but for the 1.5R ONLY is what I need. Want to put them on my Fusion.

[hakmazter]

I asked Mikey and Julia about the new 1.5 parts...

[malik]

Hak along with my 1.5R kit I am going to need 1 CR2-007 drive shaft covers, and 1 JR-0121 2 piece engine mount. I will need this order the 1st week of Feb. I will get everything else shortly after, there isnt any racing till march anyway depending on the weather. And sorry for posting this on that other thread which was wrong. If you can PM me with my total.

[Dave D]

Stuff is in the air. I got 87s and 30s coming....

Mike

How long does it usually take for everything to get here?

Also what is the price on these
What kind of deal on the no dust wheels . I looked in the store and it said out of stock.

Same thing with the wings. Store say's out of stock. or is it this CR8-0014-YE
Thanks

[hakmazter]

the wings are the fashion version, not the proline version.

http://www.casterracingusa.com/product.php?productid=343&cat=0&page=1

I have 5 of each color. It is the new wing.

All of the old stuff I do not have listed on the site. I need to put it up....

[Dave D]

the wings are the fashion version, not the proline version.

http://www.casterracingusa.com/product.php?productid=343&cat=0&page=1

I have 5 of each color. It is the new wing.

All of the old stuff I do not have listed on the site. I need to put it up....

Not anymore I just bought 2 green and 1 yellow.
I also want enough of the dust proof wheels for atleast 2 set's.

[hakmazter]

I think I am going to have to make another tire order.....

I am not putting up anything tonight but will go through this list tomorrow night and subtract what I can and pm people who want stuff.

There were a few items that were missing so they must have not had everything in stock. But 99% of it was there.

[Fischer]

What kind of deal on the Green wheels? I need some wheels and a few wings!

thanks,
Fischer

[hakmazter]

$2 each. Might as well lose more money.....lol. But they come in pairs.....so that would be $8 for a set of 4 wheels. OR I will package them up as $15 for 8 wheels. I need to see how many pairs I have.

[hakmazter]

So an extra $15 Dave......

[vnmsgt]

Hey guys if the white no dust he has are out of stock I have some for $5.00 pair too. I also have green, white and yellow Caster wings if they are out of stock and you need them right away for $6.

[Deznuts05]

WOOO HOO! I got ma parts! This greande looks freaking awsome in person!

[vnmsgt]

WOOO HOO! I got ma parts! This greande looks freaking awsome in person!

Cool man. You have been waiting awhile for them. Like Santa Clause came!

[slakr]

Did any ZX-0087 come in?

[hakmazter]

yep. how many did you want?

[slakr]

Thanks Mike... order placed (#345).

[DustinH]

Any word on availability of the new premount tires and 1.5 body? Also, how do we order a banner and any pics? Got money coming soon to spend!!

[razzor]

pm Hak

[badassrevo]

I need two complete sets tie rod ends and steering balls.
please post the p/n's for the 1.5r parts.
or order them and let me know.
Is there a p/n for the diff shimms or a shim kit made by Caster?
I want a few of those too.

[Deznuts05]

Hak,

I know you're away but I'll need two pairs of rear threaded big bore shocks. Also red springs from the 1.5r kits, please.